Application and Attentions of Portable Wire Rope Tester

2020-05-22

Portable wire rope tester is an instrument that inspects safety of wire rope, and the equipment is convenient to carry, install and remove. However, there are many ropes that lack of inspection, especially in elevator, military and oil/gas industry, wire rope in these industries causes some potential risks that affect safety in construction and personnel security. Periodical inspection helps to increase the safety of wire rope.

1) Application of Wire Rope Tester

  1、Military
TS-X11 series wire rope flaw detection portable device applies to single person carrying and removing, also convenient to install and transfer; TST wire rope tester in wide range application field is not only able to inspect motionless wire rope; but also inspecting running wire rope; applying to servicing wire rope inspection on the vulnerable part.
  2、Elevator
TS-P51 series elevator wire rope flaw detection system are developed for elevator industry specifically. The system is built for inspecting wire rope to detect many different flaws such as broken wire, fatigue, corrosion, abrasion and deterioration during using. To evaluate elevator wire rope safety state accurately, TST technology provides reliable scientific judgment to make potential safety hazard stand nowhere.
  3、Port
TS-X11 series steel wire rope flaw detection system for port, suitable for single person to carry, or easy to install temporarily, easy to transfer; Anti-salt fog, anti-corrosion, customized for the port environment, can be used to detect the static and immobile steel wire rope; Also can carry on the flaw detection to the movement steel wire rope; That is suitable for regular local inspection of the consumable and vulnerable parts of the steel wire rope in service. Also suitable for regular, irregular wire rope tour "spot inspection" inspection work.

  4. Mining
TS-X11 series steel wire rope flaw detection system for mining, suitable for single person to carry, or easy to install temporarily, easy to transfer; Its application domain is extensive, can carry on the flaw detection to the static not moving steel wire rope; Also can carry on the flaw detection to the movement steel wire rope; That is suitable for regular local inspection of the consumable and vulnerable parts of the steel wire rope in service. Also suitable for regular, irregular wire rope tour "spot inspection" inspection work.
  5、Oil/gas

Ts-x11 series steel wire rope flaw detection (carrying) system for petroleum, suitable for single person to carry at the same time, or easy to install temporarily, easy to transfer; Explosion-proof, anti-salt fog, anti-corrosion, high temperature and cold, tailored for the environment of offshore oil and offshore oil, can be used to detect the static and immobile steel wire rope; Also can carry on the flaw detection to the movement steel wire rope; That is suitable for regular local inspection of the consumable and vulnerable parts of the steel wire rope in service. Also suitable for regular, irregular wire rope tour "spot inspection" inspection work.

2) Attentions

1. The user should be familiar with the performance, precautions and discard standards of all kinds of steel wire rope spreader and its end parts.
2, the selection of the wire rope sling should be suitable for the shape characteristics and specific requirements of the work piece to be hoisted, in the absence of conditions for use, must not be used.
3. Before operation, the steel wire rope sling and its accessories shall be checked and confirmed to be in good condition before use.
4, before hanging, should be correctly selected cable point; Before lifting, make sure the binding is firm.
5. Spenders and accessories shall not exceed their rated lifting weight, and the sling shall not exceed the working load under the corresponding hanging state.
6, in the operation should prevent damage to wire rope spenders and accessories, if necessary in the corners should be added Angle protection.
7. Steel wire rope spenders should be inspected regularly during the use period. If possible, inspection should be carried out on spindles and end fittings of large tonnage and important products.

More Than Safer